Reg-slide PP Polyurethane Wear Liners

Reg-Slide PP Polyurethane Wear Plates are a premium grade wear resistant 90 Duro polyurethane liner with steel backing.


Reg-Slide PP Polyurethane Wear Plates are made from a premium polyurethane compound and will display excellent resistance to wet slurry and fine particle sliding abrasion.

Reg-Slide PP Polyurethane Wear Plates have excellent physical properties including cut and tear resistance.  They feature a low friction coefficient which results in excellent anti-stick properties which increases material flow and reduces the build-up of sticky materials.

Reg-Slide PP Polyurethane Wear Plates are reinforced with a vulcanized steel backing plate for stability in the most demanding applications. This vulcanized steel backing plate allows for extremely strong mechanical fastening to equipment.

Reg-Slide PP Polyurethane Wear plates can be supplied as a custom engineered wear protection rubber lining system for your equipment. They are suitable for high wear and moderate impact applications.


Reg-Slide PP Polyurethane Wear Plates have been designed primarily for use as a wear protection plastic lining system.

They are installed into equipment to reduce material build-up and protect steel surfaces from abrasion and impact.

They are predominantly used in the Mining, Quarrying and Mineral processing industries, typically on the following equipment:

  • Chutes
  • Screens
  • Hoppers and bins
  • Feeders
  • Stacker / Reclaimer buckets
  • Conveyor Hoods
  • Dump truck bodies

Reg-Slide PP Polyurethane Wear Plates are also used extensively throughout the Agriculture industry on a range of grain handling, processing and storage equipment.

They can also be used for any materials handling application which requires an anti-stick and abrasion resistant plastic liner.


ColourRed with steel backing
Specific Gravity1.1ASTM D297
Hardness90° ±5° Shore AASTM D2240
Tensile Strength37 MPa (min)ASTM D412
Elongation @ Break420% (min)ASTM D412
Temperature Range20°C to +70°C


Reg-Slide PP Polyurethane Wear plates are custom made in Australia.  They are made-to-order and can be supplied in a range of thicknesses and profiles and include a standard 5mm or heavy duty 10mm thick steel backing plate.

Reglin can also supply a range of polyurethane products to suit your specific requirements. See Custom Made Polyurethane.