Cera-Grip Ceramic Strip Lagging

Cera-Grip Ceramic Strip Lagging is a premium grade wear resistant composite ceramic pulley lagging strip with CN bonding layer.


Cera-Grip Ceramic Strip Lagging is made from a highly elastic premium natural rubber compound.  It contains embedded wear resistant alumina ceramic tiles for extreme abrasion resistance.

Cera-Grip contains dimpled ceramic tiles which maximizes the coefficient of friction between the pulley and conveyor belt. Each ceramic tile contains rubber around all sides for ultimate adhesion within the lagging and to allow flexibility of the tile.  This flexibility ensures the tile can contact the belt correctly ensuring maximum grip whilst reducing wear to the conveyor belt cover.

Cera-Grip Ceramic Strip Lagging features 46% Ceramic tile coverage and a grooved profile surface.

Cera-Grip Lagging features a CN bonding layer to achieve ultimate adhesion when bonded to pulley surfaces and allows for good bond strength to be achieved even in adverse conditions encountered on site.  It is compatible with a wide range of cold bonding rubber adhesives.

Cold Bonding Adhesives

Reglin stock Cold Bonding Adhesives proven for compatibility with our CN Bonding layer.


Cera-Grip Ceramic Strip Lagging has been designed primarily for use as a wear and corrosion protection lining for conveyor pulleys.

It is designed to be cold bonded to pulleys to increase friction and to protect the pulley surface from abrasion, improving performance and pulley wear life.

The Cera-Grip design prevents material buildup and assists with shedding dirt and water away from the pulley, reducing belt slippage and improving drive and tracking of conveyors.

It is supplied in strip form for easy application, in-situ without removing the conveyor belt if required.

Cera-Grip Ceramic Strip Lagging is predominantly used in the Mining, Quarrying, Recycling and Mineral processing industries.

It is designed specifically for use on conveyor system drive pulleys operating in extreme conditions, including wet, dirty or dusty environments.  It is suitable for use on long conveyor systems and in medium and high belt tension applications.


ColourBlack with CN bonding layer
Specific Gravity1.10
Hardness60° ± 5° Shore AASTM D2240
Tensile Strength20 MPa (min)ASTM D412
Elongation @ Break450% (min)ASTM D412
Abrasion90 mm³ (max) @ 10NASTM D5963
Temperature Range-20°C to +70°C
Tear Strength80 N/mm (min)ASTM D624
Ceramic Tile92% Alumina content
Density3.65 g/ccASTM C373-99
Hardness (Rockwell)77 R45NASTM C1327
Compressive Strength1950 Mpa (min)ASTM C1424-04
Flexural Strength320 Mpa (min)ASTM C1161-02c
Water Absorption0%ASTM C373-88
Abrasion by Impingement0.05 grams (max)
Abrasion by Rubbing0.1 grams (max)


Reglin stock Cera-Grip Ceramic Strip Lagging in standard thicknesses.  It is available in a range of strips to suit specific belt and pulley widths as well as rolls with full ceramic area that can be cut to suit any pulley.

CPL0650Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 1050mm
(Ceramic Area 650mm)
6.8 kgs
CPL0800Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 1200mm
(Ceramic Area 800mm)
7.8 kgs
CPL0950Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 1350mm
(Ceramic Area 950mm)
8.8 kgs
CPL1100Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 1500mm
(Ceramic Area 1100mm)
9.8 kgs
CPL1250Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 1650mm
(Ceramic Area 1250mm)
10.8 kgs
CPL1600Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 2000mm
(Ceramic Area 1600mm)
13 kgs
CPL1850Cera-Grip Ceramic Strip Lagging 12mm x 385mm x 2250mm
(Ceramic Area 1850mm)
14.4 kgs
CPL1350-15Cera-Grip Ceramic Strip Lagging 15mm x 385mm x 1750mm
(Ceramic Area 1350mm)
11.8 kgs
CPL1550-15Cera-Grip Ceramic Strip Lagging 15mm x 385mm x 1950mm
(Ceramic Area 1550mm)
14.5 kgs
CPL1700-15Cera-Grip Ceramic Strip Lagging 15mm x 385mm x 2100mm
(Ceramic Area 1700mm)
15.9 kgs
CPL1850-15Cera-Grip Ceramic Strip Lagging 15mm x 385mm x 2550mm
(Ceramic Area 1850mm)
17 kgs
CPLRCera-Grip Ceramic Strip Lagging 12mm x 385mm (15 Meter Roll)
(Full Ceramic Area)
6.5 kgs (per L/M)