Regline 40 UV Lining Rubber

Regline 40 UV Lining Rubber is a premium grade wear and UV resistant 40 Duro rubber lining with a CN bonding layer

FEATURES

Regline 40 UV Lining Rubber is made from a highly elastic premium natural rubber compound and will display excellent resistance to both wet and dry fine particle sliding abrasion.  It contains carbon reinforcing fillers which gives it good ozone/UV resistance making it suitable for outdoor use.

Regline 40 UV has excellent physical properties including cut and tear resistance and is very flexible.  It will also display resistance to some mild chemicals, including acids and alkalis used in mineral processing.

Regline 40 UV features a specially formulated Neoprene based CN bonding layer to achieve ultimate adhesion when bonded to steel or rubber surfaces.  To achieve ultimate adhesion, TRS adhesives are recommended.  The CN bonding layer and TRS adhesive system is extremely flexible.  It allows for good bond strength to be achieved even in adverse conditions encountered on site.

APPLICATIONS

Regline 40 UV Lining Rubber has been designed primarily for use as a wear and corrosion protection lining system.

It is bonded to equipment to protect steel surfaces from abrasion and corrosion. It is predominantly used in the Mining, Quarrying and Mineral processing industries, typically lining the following equipment:

  • Chutes
  • Tanks and pipework
  • Cyclones
  • Launders
  • Flotation cells
  • Screen components
  • Trommels
  • Conveyor pulleys and idlers
  • Magnetic separator conveyor belts

Regline 40 UV can also be used for any application which requires a wear resistant flexible rubber including the following:

  • Mill seals
  • Loading / Discharge socks
  • Transfer and joining sleeves
  • Wear curtains
  • Premium skirting rubber
  • Variety of sealing applications

TECHNICAL INFORMATION

PolymerNR
Colour Black with CN bonding layer
Specific Gravity 1.00ASTM D297
Hardness 40° ± 5° Shore AASTM D2240
Abrassion85mm³ (max) @ 5NASTM D5963
Tensile Strength15 MPa (min)ASTM D412
Elongation @ Break550% (min)ASTM D412
Tear Strength30 N/mm (min)ASTM D624
Temperature Range-20°C to + 70°C

AVAILABLE SIZES

Reglin stock Regline 40 UV Lining Rubber in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
REGB4003Regline 40 with CN B/L 3mm x 1500mm (10 L/M Rolls) 5.6 kgs
REGB4006Regline 40 with CN B/L 6mm x 1500mm (10 L/M Rolls) 10.1 kgs
REGB4010Regline 40 with CN B/L 10mm x 1500mm (10 L/M Rolls) 16.2 kgs
REGB4012Regline 40 with CN B/L 12mm x 1500mm (10 L/M Rolls) 19.4 kgs