Regline 40 Lining Rubber

Regline 40 Lining Rubber is a premium grade wear resistant 40 Duro rubber lining with a CN bonding layer

FEATURES

Regline 40 Lining Rubber is made from a highly elastic premium natural rubber compound and will display excellent resistance to both wet and dry fine particle sliding abrasion.  It contains reinforcing fillers which gives it extra resistance to cutting and gouging by sharp particles.

Regline 40 has excellent physical properties including cut and tear resistance and is very flexible.  It will also display resistance to some mild chemicals, including acids and alkalis used in mineral processing.

Regline 40 features a specially formulated Neoprene based CN bonding layer to achieve ultimate adhesion when bonded to steel or rubber surfaces.  To achieve ultimate adhesion, TRS adhesives are recommended.  The CN bonding layer and TRS adhesive system is extremely flexible.  It allows for good bond strength to be achieved even in adverse conditions encountered on site.

APPLICATIONS

Regline 40 Lining Rubber has been designed primarily for use as a wear and corrosion protection lining system.

It is bonded to equipment to protect steel surfaces from abrasion and corrosion. It is predominantly used in the Mining, Quarrying and Mineral processing industries, typically lining the following equipment:

  • Chutes
  • Tanks and pipework
  • Cyclones
  • Launders
  • Flotation cells
  • Screen components
  • Trommels
  • Conveyor pulleys and idlers
  • Magnetic separator conveyor belts

Regline 40 can also be used for any application which requires a wear resistant flexible rubber including the following:

  • Mill seals
  • Loading/ Discharge socks
  • Transfer and joining sleeves
  • Wear curtains
  • Premium skirting rubber
  • Variety of sealing applications

TECHNICAL INFORMATION

Polymer NR
Colour Orange with CN bonding layer
Specific Gravity 1.08ASTM D297
Hardness 40° ± 5° Shore AASTM D2240
Tensile Strength20 MPa (min)ASTM D412
Elongation @ Break600% (min)ASTM D412
Abrasion 85mm³ (max) @ 5NASTM D5963
Temperature Range-20°C to + 70°C
Tear Strength45 N/mm (min)ASTM D624

AVAILABLE SIZES

Reglin stock Regline 40 Lining Rubber in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
REGO4003Regline 40 with CN B/L 3mm x 1500mm (10 L/M Rolls)6.2 kgs
REGO4006Regline 40 with CN B/L 6mm x 1500mm (10 L/M Rolls)10.7 kgs
REGO40062000Regline 40 with CN B/L 6mm x 2000mm (10 L/M Rolls)14.2 kgs
REGO4010Regline 40 with CN B/L 10mm x 1500mm (10 L/M Rolls)16.5 kgs
REG40102000Regline 40 with CN B/L 10mm x 2000mm (10 L/M Rolls)22 kgs
REG4012Regline 40 with CN B/L 12mm x 1500mm (10 L/M Rolls)20.7 kgs
REG40122000Regline 40 with CN B/L 12mm x 2000mm (10 L/M Rolls)27.6 kgs
REGO4020Regline 40 with CN B/L 20mm x 1500mm (10 L/M Rolls)33 kgs