Potable Water EPDM Rubber Sheet

Reglin Potable Water EPDM is a premium grade 65 Duro potable water certified rubber sheet.

FEATURES

Reglin Potable Water EPDM Rubber Sheet is made from a premium EPDM rubber compound designed specifically for use in contact with drinking water.

Potable Water EPDM is independently tested and certified by the Australian Water Quality Centre, it meets AS/NZS 4020:2018 – Testing of products for use in contact with drinking water and conforms to the requirements of WSA 109 2011 Table 2.1.

Potable Water EPDM retains all other properties of EPDM 65 Rubber Sheet and will display high temperature and excellent chemical resistance to both acids and alkalis.

EPDM has excellent ozone/UV resistance making it weather resistant and suitable for prolonged outdoor use.  It has good physical properties including mechanical strength.

EPDM exhibits outstanding water resistance.   It is suitable for prolonged exposure to aquatic environments and will not deteriorate when submerged in fresh or sea water.  It is compatible with hot water and steam.

STANDARDS

Potable Water EPDM conforms to AS/NZS 4020:2018 – Testing of products for use in contact with drinking water and to the requirements of WSA 109 2011 Table 2.1.

APPLICATIONS

Reglin Potable Water EPDM Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating, and protecting steel or other surfaces in applications.

Potable Water EPDM has been designed specifically for use in applications for the handling and storage of drinking water. It is also suitable for long term use in outdoor environments with high UV exposure.

Its properties make it suitable for use in a range of applications including:

  • Flange gaskets on pipes and tanks
  • Lining of pipes and tanks
  • Transfer and joining sleeves
  • Weatherproof flashing
  • Insulating strip
  • Isolation barriers
  • Variety of drinking water applications

TECHNICAL INFORMATION

Polymer EPDM
Polymer Content100%
ColourBlack
Specific Gravity 1.14ASTM D297
Hardness65° ± 5° Shore AASTM D2240
Tensile Strength11 MPa (min)ASTM D412
Elongation @ Break350% (min)ASTM D412
Temperature Range-30°C to +120°C
Compression Set 72 hrs @ 23°C12.5% (max)ASTM D395
Compression Set 24 hrs @ 70°C18.0% (max)ASTM D395
Heat Age Properties 7 days @ 70°C

Hardness Change
Tensile Change
Elongation Change


+3° Shore A
+8.5% (ave)
-14
ASTM D573
Volume Change 7 days @ 70°C
(In distilled water)
+3.0%ASTM D471

AVAILABLE SIZES

Reglin stock Potable Water EPDM Rubber Sheet in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
EPDMPW01.5EPDM Potable Water Rubber Sheet 1.5mm x 1200mm (10 L/M Rolls) 2.3 kgs
EPDMPW03EPDM Potable Water Rubber Sheet 3mm x 1200mm (10 L/M Rolls)4.5 kgs
EPDMPW031500EPDM Potable Water Rubber Sheet 3mm x 1500mm (10 L/M Rolls)5.6 kgs
EPDMPW04.5EPDM Potable Water Rubber Sheet 4.5mm x 1200mm (10 L/M Rolls)6.8 kgs
EPDMPW06EPDM Potable Water Rubber Sheet 6mm x 1200mm (10 L/M Rolls)9 kgs