Reglin Load Mat 850 is a recycled anti-slip rubber matting for load restraint.
FEATURES
Reglin Load Mat 850 is made from recycled SBR rubber crumb bound together with polyurethane.
Load mat 850 has a textured finish on both sides which offers high friction in both wet and dry conditions.
Load Mat 850 has been tested to ASTM D1894-11 with modification to a flat steel surface (for static and kinetic coefficients of friction). It exceeds the required coefficient of friction of 0.6 between the load mat and steel in both wet and dry conditions, as specified by the NTC Load Restraint guide
Please Note: The friction coefficient achieved when using Reglin Load Mat in service depends on the specific load and surface combination. To achieve the optimum performance, ensure that all contact surfaces are cleaned and free from contaminants. It is the responsibility of the user to ensure the load matting is suitable for their application and all relevant load restraint is followed as per the NTC Load Restraint Guide
APPLICATIONS
Reglin Load Mat 850 has been designed primarily for use as an anti-slip load restraint device.
It is typically used for increasing the coefficient of friction between transport vehicles and cargo. Load Mat 850 has been specifically designed for use in the transport industry.
It is designed to be economical and for short term use in applications with moderate, evenly distributed loads or to be fully bonded to surfaces such as timber bolsters.
Its properties make it suitable for use in a range of applications, typically on the following vehicles
- Trucks
- Rail Wagons
- Ships
- Planes
Load Matting is a standard requirement in many load restraint systems. For more information on the use of Load Mats in Australia, see the National Transport commission load restraint guide.
TECHNICAL INFORMATION
| Polymer | SBR Crumb / PU | |
| Colour | Black | |
| Density | 850 kg/m³ | |
| Coefficient of Friction (Kinetic) | >0.6 | ASTM D1894-11 (modified) |
| Temperature Range | -25°C to +80°C |
AVAILABLE SIZES
Reglin stock Load Mat 850 in a range of standard thicknesses and roll sizes. It can also be supplied in cut lengths, strips and pads to suit your application requirements.
| PART NUMBER | DESCRIPTION | WEIGHT (PER L/M) |
| AS06 | Load Mat 850 6mm x 1200mm (10 L/M Rolls) | 6.1 kgs |
| AS09 | Load Mat 850 9mm x 1200mm (10 L/M Rolls) | 9.2 kgs |
| AS12 | Load Mat 850 12mm x 1200mm (10 L/M Rolls) | 12.3 kgs |