Filter Belt Sidewall Curbing

Reglin Filter Belt Curbing is a premium grade corrugated rubber edging designed to seal the edges of filter belts.  


Reglin Filter Belt Curbing is made from a highly elastic premium rubber compound and will display excellent resistance to abrasion and impact.

Reglin Filter Belt Curbing is designed to be easily bonded to filter belt covers and to maintain flexibility in service.  It has good ozone/UV resistance making it suitable for outdoor use.

Reglin Filter Belt Curbing features a specifically designed corrugated profile to allow expansion and contraction of the edging.  This ensures it will flex with the filter belt as wraps around pulleys and can lay flat against the belt on the return side of the conveyor system.


Reglin Filter Belt Curbing has been designed primarily for use as a sidewall edging on Filter conveyor belts.

It is designed to be bonded to the edges of the filter belt to seal in material being processed and reduce spillage.

Reglin Filter Belt Curbing is typically used on filter belts in a wide range of industries including Mining, Quarrying, Mineral processing, Agriculture and Food processing.

It is designed for use on horizontal filter conveyor belts and is designed to stop wet material being conveyed from spilling over the edge of the belt.


Specific Gravity1.12ASTM D297
Hardness45° ± 5° Shore AASTM D2240
Tensile Strength15 MPa (min)ASTM D412
Elongation @ Break600% (min)ASTM D412
Abrasion155mm³ (max) @ 10NASTM D5963
Temperature Range-20°C to + 70°C


Reglin stock Filter Belt Curbing in a standard profile.  It can be supplied in cut lengths to suit your filter belt.

FBE126Filter Belt Curbing 89mm x 126mm (100 L/M Rolls)2.5 kgs