Food Grade 40 Lining Rubber

FDA approved wear resistant food grade 40 Duro rubber lining with a buffed back

FEATURES

Food Grade 40 Lining Rubber is made from a highly elastic premium natural rubber compound and will display excellent resistance to abrasion. This extremely flexible food grade rubber lining is both non-toxic and non-marking, and has excellent physical properties including cut and tear resistance.

It has been tested and conforms to FDA 21 CFR 177.2600 “Rubber articles intended for repeated use”. This makes it suitable for contact with dry, aqueous and fatty foods as defined by the FDA.

This lining rubber also features a pre-buffed finish on one side to assist with adhesion when bonded to steel or rubber surfaces. It can be bonded using a wide range of Neoprene based rubber adhesives.

STANDARDS

Food Grade 40 conforms with FDA 21 CFR 177.2600.

As stated in FDA CFR 21.177.2600.  In accordance with good manufacturing practise finished rubber articles intended for repeated use in contact with food shall be thoroughly cleansed prior to their first use in contact with food

APPLICATIONS

Food Grade 40 Lining Rubber has been designed primarily for use as a wear and corrosion protection lining system for industrial applications.

It is bonded to equipment to protect steel surfaces from wet and fine particle sliding abrasion or mechanically installed for sealing applications.

Predominantly used in the food manufacturing and processing industries, it is also used in manufacturing and mineral processing for a range of applications which require a non-marking light pigmented rubber. It is typically used on the following equipment:

  • Tanks and Pipework
  • Valves and Pumps
  • Sand Mills
  • Classifiers and Impellors
  • Conveyor Belt Pulleys and Idlers

Food Grade 40 Lining Rubber can also be used for any application which requires a wear resistant highly flexible, white or food grade rubber lining including the following:

  • Loading / Discharge Socks
  • Wear Curtains
  • Transfer and Joining Sleeves
  • Variety of Sealing Applications.

TECHNICAL INFORMATION

PolymerNR
ColourWhite with buffed back
Specific Gravity1.00ASTM D297
Hardness40° ± 5° Shore AASTM D2240
Tensile Strength19 MPa (min)ASTM D412
Elongation @ Break650% (min)ASTM D412
Abrasion80mm³ (max) @ 5NASTM D5963
Temperature Range-20°C to + 70°C
Tear Strength35 N/mm (min)ASTM D624

AVAILABLE SIZES

We stock Food Grade 40 Lining Rubber in a range of standard thicknesses and roll sizes. It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
REGFG4003Food Grade 40 Lining Rubber with Buffed Back 3mm x 1200mm (10 L/M Rolls)4.2 kgs
REGFG4006Food Grade 40 Lining Rubber with Buffed Back 6mm x 1200mm (10 L/M Rolls)8.4 kgs
keyboard_arrow_up