Neoprene HG Rubber Sheet

Reglin Neoprene HG is a premium grade, weather, heat and flame resistant rubber sheet. 

FEATURES

Reglin Neoprene HG Rubber Sheet is made from a premium Neoprene rubber compound and will display high temperature and flame resistance.

Neoprene HG has excellent physical properties including mechanical strength and abrasion resistance and has the capability for high load bearing. It has excellent ozone/ UV resistance making it weather resistant and suitable for prolonged outdoor use.

Neoprene HG exhibits good resistance to oil and petroleum based products including a range of fuels, greases, solvents and hydraulic fluids. It will also display moderate chemical resistance to acids and alkalis.

Neoprene HG is F.R.A.S. (Fire-resistant and Anti-static) rated. It is independently tested and certified by the Mine Safety Technology Centre to meet MDG 3006 / MDG 3608 Non-metallic Materials for use in Underground Coal Mines.

STANDARDS

Reglin Neoprene HG Rubber sheet conforms with MDG 3608

Certification can be supplied upon request.

APPLICATIONS

Reglin Neoprene HG Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating and protecting steel or other surfaces in critical construction applications with long design life requirements.

Neoprene HG is suitable for long term use outdoors in applications with exposure to both oils and petroleum-based products.

It is also ideal for use in underground mining and other applications where ignition points and fire potential are a high risk.

Its properties make it suitable for use in a range of applications including:

  • Bearing Pads and strips
  • Lining of equipment
  • Transfer and joining sleeves
  • Flexible expansion joints
  • Critical construction seals
  • Flange gaskets on pipes and tanks
  • Curtains and skirts
  • Anti-vibration mounts
  • Insulating strip
  • Isolation barriers

TECHNICAL INFORMATION

Polymer CR
Polymer Content 80%
ColourBlack
Specific Gravity1.4ASTM D297
Hardness80° ± 5° Shore AASTM D2240
Tensile Strength14 MPa (min)ASTM D412
Elongation @ Break300% (min)ASTM D412
Abrasion 170mm³ (max) @10NASTM D5963
Temperature Range -25°C to +110°C
Compression Set 22 hrs @ 70°C25% (max)ASTM D395 B
Heat Age Properties 70 hrs @ 100°C

Hardness Change
Tensile Change
Elongation Change


0/+15° Shore A (max)
+/-15% (max)
-40% (max)
ASTM D573
Ozone Resistance
100 hrs @ 100pphm, 20% Strain, 40°C
No Cracks ATM D1149

AVAILABLE SIZES

Reglin stock Neoprene HG Rubber Sheet in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
NEOBP01.5Neoprene HG Rubber Sheet 1.5mm x 1200mm (10 L/M Rolls)2.7 kgs
NEOBP03Neoprene HG Rubber Sheet 3mm x 1200mm (10 L/M Rolls)5.2 kgs
NEOBP04.5Neoprene HG Rubber Sheet 4.5mm x 1200mm (10 L/M Rolls)7.8 kgs
NEOBP06Neoprene HG Rubber Sheet 6mm x 1200mm (10 L/M Rolls)10.3 kgs
NEOBP10Neoprene HG Rubber Sheet 10mm x 1200mm (10 L/M Rolls)17.2 kgs