Cera-Wear SR Ceramic Wear Pads

Cera-Wear SR Ceramic Wear Pads are a premium grade wear resistant composite ceramic liner with a CN bonding layer.

FEATURES

Cera-Wear SR Ceramic Wear Pads are made from wear resistant 92% alumina ceramic tiles embedded within a rubber matrix.  They display excellent resistance to both high velocity and high flow wet slurry and fine particle sliding abrasion and impact.

Cera-Wear SR Pads feature square shaped ceramic tiles completely vulcanized within a 40 Duro premium natural rubber compound.  This square shape combined with the rubber between the tiles gives impact resistance and flexibility for installation on flat, convex or concave surfaces.

Cera-Wear SR Ceramic Wear Pads feature a specially formulated Neoprene based CN bonding layer to achieve ultimate adhesion when bonded to steel or rubber surfaces. To achieve ultimate adhesion, TRS adhesives are recommended. The CN bonding layer and TRS adhesive system is extremely flexible. It allows for good bond strength to be achieved even in adverse conditions encountered on site.

APPLICATIONS

Cera-Wear SR Ceramic Wear Pads have been designed primarily for use as a wear protection ceramic lining system.

They are bonded to equipment to protect steel surfaces from abrasion and impact.  They are predominantly used in the Mining, Quarrying and Mineral processing industries, typically on the following equipment:

  • Chutes
  • Tanks and Pipework
  • Conveyor Loading and Transfer Hoods
  • Feeders
  • Screen Beams and Components
  • Cyclones
  • Launders
  • Flotation Cells
  • Mill Feed Chutes
  • Sumps and Underpans

Cera-Wear SR Pads are also used extensively throughout the Agriculture industry on a range of grain handling, processing and storage equipment.

TECHNICAL INFORMATION

CERAMIC TILE
Alumina Content 92% (min)
Density3.65 g/ccASTM C373-88
Hardness (Rockwell)77 R45NASTM C1327
Compressive Strength1950 Mpa (min)ASTM C1424-04
Flexural Strength320 Mpa (min)ASTM C1161-02c
Water Absorption0%ASTM C373-88
Abrasion by Impingement0.05 grams (max)
Abrasion by Rubbing0.1 grams (max)
RUBBER
PolymerSBR
ColourBlack
Hardness40° ± 5° Shore AASTM D2240

AVAILABLE SIZES

Reglin stock Cera-Wear SR Ceramic Wear Pads in 500mm x 500mm panels in a range of standard thicknesses. They can also be supplied as a custom-made bolt in Ceramic wear liner system to suit your equipment and application requirements. See Custom Made Steel Backed Ceramic Liners.

PART NUMBER DESCRIPTIONWEIGHT (EACH)
CWP05/0302SRCera-Wear SR Ceramic Wear Pad with CN B/L 5mm x 500mm x 500mm
(Square pattern 3mm thick x 20mm A/F tiles on 2mm rubber with rubber between)
4 kgs
CWP10/0604SRCera-Wear SR Ceramic Wear Pad with CN B/L 10mm x 500mm x 500mm
(Square pattern 6mm thick x 20mm A/F tiles on 4mm rubber with rubber between)
6.4 kgs
CWP14/1004SRCera-Wear SR Ceramic Wear Pad with CN B/L 14mm x 500mm x 500mm
(Square pattern 10mm thick x 20mm A/F tiles on 4mm rubber with rubber between)
10 kgs
CWP20/1208SRCera-Wear SR Ceramic Wear Pad with CN B/L 20mm x 500mm x 500mm
(Square pattern 12mm thick x 20mm A/F tiles on 8mm rubber with rubber between)
12 kgs