Metal Detectable Silicone Rubber Sheet

Reglin Metal detectable Silicone Rubber Sheet is a premium grade 60 Duro food grade and heat resistant silicone rubber sheet.

FEATURES

Reglin Metal detectable Silicone Rubber Sheet is made from a premium Silicone rubber compound and will display very high temperature resistance.  It will maintain its flexibility and physical properties over a wide temperature range

Metal detectable silicone rubber contains additives which make it magnetic and visible to metal detection equipment.

Silicone has excellent ozone resistance and is UV stable making it weather resistant and suitable for outdoor use.

Reglin Metal detectable Silicone Rubber Sheet is tested and conforms to FDA 21 CFR 177.2600 “Rubber articles intended for repeated use”.  This makes it suitable for contact with dry, aqueous and fatty foods as defined by the FDA.

Metal Detectable Silicone Rubber Sheet is fully post cured.  It is carefully produced to comply with European Commission regulations EC2023/2006 “good manufacturing practise for materials and articles intended to come into contact with food”.

STANDARDS

Reglin Metal Detectable Rubber Sheet conforms with the following standards.

As stated in FDA 21 CFR 177.2600.  In accordance with good manufacturing practise finished rubber articles intended for repeated use in contact with food shall be thoroughly cleansed prior to their first use in contact with food.

APPLICATIONS

Reglin Metal Detectable Silicone Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating and protecting steel or other surfaces.

It is typically used for sealing, insulating, isolating and protecting steel or other surfaces.

It is suitable for use in critical hygienic environments such as food, drink and pharmaceutical facilities which use metal detection equipment to eliminate possible contamination.

Its properties make it suitable for use in a wide range of applications including:

  • Flange gaskets on pipes and tanks
  • Transfer and joining sleeves
  • Insulating strip
  • Isolation barriers
  • Variety of sealing applications

TECHNICAL INFORMATION

Polymer Silicone
Colour Blue
Hardness 68° ± 5° Shore AASTM D2240
Tensile Strength8 MPa (min)ASTM D412
Elongation @ Break327% (min)ASTM D412
Temperature Range-60°C to +200°C (continuous)
Silicone can also withstand higher intermittent temperatures.
For more information see Life Expectancy of Silicone Rubber

Please note: Exposure of Metal detectable Silicone to continuous high temperatures can cause loss of magnetic properties.
Tear Strength19 N/mm (min)ASTM D624
Compression Set 24hrs @ 150°C11% (Max)ASTM D395B
Metal Detectable Properties 11.25/9.34mm (median test value)
Thermal Conductivity 0.24 W.m-1 .K-1

AVAILABLE SIZES

Metal Detectable Silicone Rubber Sheet can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M
SILMD03Metal Detectable Silicone Rubber Sheet 3mm x 1200mm (10 L/M Rolls)4.7 kgs