Class 1 – 4
Reglin Class 1 – 4 Electrical Safety Matting is a premium grade electrical insulating rubber mat
Reglin Electrical safety matting is made from a premium EPDM rubber compound and will display excellent electrical insulating properties. It features a textured surface one side and a ribbed finish on the other side to ensure both sides are slip resistant.
Reglin Class 1 – 4 Electrical safety matting is tested and conforms to AS/NZS IEC 61111 : 2020 Live working – Electrical insulating mats.
The maximum use voltage recommended for each class of Electrical Safety Matting is designated in the following table.
|Class|| A.C. |
Electrical safety matting is highly durable and has good physical properties including mechanical strength and puncture resistance. It has good ozone/UV resistance making it weather resistant and suitable for outdoor use.
Reglin Electrical Safety Matting conforms to the standard AS/NZS IEC 61111:2020 – Live Working – Electrical Insulating Mats.
Class 1 – 4 Electrical Safety Matting has been designed specifically for use as a floor covering for the electrical protection of workers on electrical installations.
It is typically used in switchboard rooms and around other electrical equipment where there is a risk of electric shock to personnel.
The selection of the class of electrical insulating matting for the application is based on the maximum nominal voltage of the energized system that is to be worked on as outlined in the table above.
|Hardness||70° ± 5° Shore A||ASTM D2240|
|Tensile Strength||5 MPa (min)||ASTM D624|
|Elongation @ Break||250% (min)||ASTM D412|
|Temperature Range||-25°C to +100°C|
|Tear Strength||20N/mm (min)||ASTM D624|
Reglin can supply Electrical Safety Matting Classes 1 -4 for higher voltage applications upon request. Lead time and minimum order quantities apply to these products.