Regline 38 Lining Rubber

Regline 38 Lining Rubber is a premium grade wear resistant 38 Duro rubber lining with a CN bonding layer. 

FEATURES

Regline 38 Lining Rubber is made from a highly elastic premium natural rubber compound and will display excellent resistance to wet slurry and fine particle sliding abrasion.

Regline 38 has excellent physical properties including cut and tear resistance and is extremely flexible.  It will also display resistance to some mild chemicals, including acids and alkalis used in mineral processing.

Regline 38 features a specially formulated Neoprene based CN bonding layer to achieve ultimate adhesion when bonded to steel or rubber surfaces.  To achieve ultimate adhesion, TRS adhesives are recommended.  The CN bonding layer and TRS adhesive system is extremely flexible.  It allows for good bond strength to be achieved even in adverse conditions encountered on site.

APPLICATIONS

Regline 38 Lining Rubber has been designed primarily for use as a wear and corrosion protection lining system.

It is bonded to equipment to protect steel surfaces from wet slurry and fine particle sliding abrasion. It is predominantly used in the Mining, Quarrying and Mineral processing industries, typically lining the following equipment:

  • Chutes
  • Tanks and pipework
  • Valves and pumps
  • Cyclones
  • Launders
  • Flotation Cells
  • Sumps and underpans
  • Screen components
  • Trommels
  • Magnetic seperator drums

Regline 38 can also be used for any application which requires a wear resistant highly flexible rubber including the following:

  • Mill seals
  • Loading / Discharge socks
  • Transfer and joining sleeves
  • Wear curtains
  • Variety of sealing applications

TECHNICAL INFORMATION

PolymerNR
Colour Pink with CN bonding layer
Specific Gravity 0.97ASTM D297
Hardness38° ± 5° Shore AASTM D2240
Tensile Strength22 MPa (min)ASTM D412
Elongation @ Break650% (min)ASTM D412
Abrasion80mm³ (max) @ 5NASTM D5963
Temperature Range-20°C to + 70°C
Tear Strength60 N/mm (min)ASTM D624
Resilience72% (Min)ASTM D2632

AVAILABLE SIZES

Reglin stock Regline 38 Lining Rubber in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
REG3803Regline 38 Lining Rubber with CN B/L 3mm x 1500mm (10 L/M Rolls)5.6 kgs
REG3806Regline 38 Lining Rubber with CN B/L 6mm x 1500mm (10 L/M Rolls)10.1 kgs
REG3810Regline 38 Lining Rubber with CN B/L 10mm x 1500mm (10 L/M Rolls)16.2 kgs
REG38102000Regline 38 Lining Rubber with CN B/L 10mm x 2000mm (10 L/M Rolls)21.6 kgs
REG3812Regline 38 Lining Rubber with CN B/L 12mm x 1500mm (10 L/M Rolls)19.4 kgs
REG3816Regline 38 Lining Rubber with CN B/L 16mm x 1500mm (10 L/M Rolls)25.8 kgs
REG3820Regline 38 Lining Rubber with CN B/L 20mm x 1500mm (10 L/M Rolls)31.7 kgs
REG38202000Regline 38 Lining Rubber with CN B/L 20mm x 2000mm (10 L/M Rolls)42.3 kgs
REG3825Regline 38 Lining Rubber with CN B/L 25mm x 1500mm (10 L/M Rolls)39.6 kgs