Reglin Neoprene 65 Nylon Insertion is a superior grade 65 Duro weather and heat resistant rubber sheet with Nylon reinforcement.
FEATURES
Reglin Neoprene 65 Nylon Insertion sheet is made from a premium Neoprene rubber compound and will display moderate temperature and flame resistance.
Neoprene 65 Nylon Insertion is reinforced with a nylon monofilament fabric which gives improved tear strength and dimensional stability.
Neoprene 65 Nylon Insertion has good physical properties including mechanical strength and abrasion resistance. It has ozone/UV resistance making it weather resistant and suitable for outdoor use.
Neoprene 65 Nylon Insertion exhibits moderate resistance to oil and petroleum-based products including a range of fuels, greases, solvents and hydraulic fluids. It will also display some chemical resistance to acids and alkalis.
APPLICATIONS
Reglin Neoprene 65 Nylon Insertion has been designed primarily for use as a flexible strip, pad, gasket or lining.
It is typically used for sealing, insulating, isolating and protecting steel or other surfaces.
Neoprene Insertion is suitable for use outdoors in applications with potential for mild exposure to oils and petroleum-based products.
Its properties make it suitable for use in a range of applications including:
- Flange gaskets on pipes and tanks
- Lining of equipment
- Transfer and joining sleeves
- Flexible expansion joints
- Construction seals
- Curtains and skirts
- Insulating strip
- Isolation barriers
TECHNICAL INFORMATION
| Polymer | CR | |
| Polymer Content | 30% | |
| Reinforcement | Nylon Monofilament | |
| Colour | Black | |
| Specific Gravity | 1.35 | ASTM D297 |
| Hardness | 65° ± 5° Shore A | ASTM D2240 |
| Tensile Strength | 7 MPa (min) | ASTM D412 |
| Elongation @ Break | 300% (min) | ASTM D412 |
| Abrasion | 400 mm³ (max) @ 10N | ASTM D5963 |
| Temperature Range | -25°C to +80°C | |
| Compression Set | 32% | ASTM D395 B |
| Tear Strength | 25 N/mm (min) | ASTM D624 |
AVAILABLE SIZES
Reglin stock Neoprene 65 Nylon Reinforcement in a range of standard thicknesses and roll sizes. It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements
| PART NUMBER | DESCRIPTION | WEIGHT PER L/M |
| NEOI1.5N | Neoprene 65 Insertion Rubber Sheet 1.5mm x 1200mm x 1 Ply Nylon Reinforced (10 L/M Rolls) | 2.5 kgs |
| NEOI03N | Neoprene 65 Insertion Rubber Sheet 3mm x 1200mm x 1 Ply Nylon Reinforced (10 L/M Rolls) | 4.9 kgs |
| NEOI04.5N | Neoprene 65 Insertion Rubber Sheet 4.5mm x 1200mm x 2 Ply Nylon Reinforced (10 L/M Rolls) | 7.5 kgs |
| NEOI06N | Neoprene 65 Insertion Rubber Sheet 6mm x 1200mm x 2 Ply Nylon Reinforced (10 L/M Rolls) | 10 kgs |