Nitrile 65 Rubber Sheet

Reglin Nitrile 65 is a premium grade 65 Duro oil and fuel resistant rubber sheet. 


Reglin Nitrile 65 Rubber Sheet is made from a premium Nitrile rubber compound and will display excellent resistance to oil and petroleum-based products including a range of fuels, greases, solvents and hydraulic fluids.

Nitrile 65 has low gas permeability and will display good water resistance. It is also resistant to mineral oils and a range of aliphatic hydrocarbons.

Nitrile 65 has excellent physical properties including mechanical strength and abrasion resistance. It will also display good temperature resistance and moderate chemical resistance to some acids and alkalis.


Reglin Nitrile Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating and protecting steel or other surfaces.

Nitrile is suitable for use in applications with long term exposure to oils and petroleum-based products such as grease, hydraulic fluid and a range of fuels and solvents.

Its properties make it suitable for use in a range of applications including:

  • Flange gaskets on pipes and tanks
  • Lining of equipment
  • Transfer and joining sleeves
  • Bitumen handling equipment seals and skirts
  • Insulating strip
  • Isolation barriers
  • Oil resistant Skirting Rubber
  • Fuel hose camlock washers
  • Variety of oil resistant sealing applications


Polymer Content100%
Specific Gravity1.20ASTM D297
Hardness65° ± 5° Shore AASTM D2240
Tensile Strength15 MPa (min)ASTM D412
Elongation @ Break400% (min)ASTM D412
Abrasion275mm³ (max) @ 10NASTM D5963
Temperature Range-25°C to +90°C
Compression Set30%ASTM D395 B
Tear Strength40 N/mm (min)ASTM D624
Oil ResistanceVolume Swell 72 hrs @ 70°C
OIL #1 -3%
OIL #2 +5%
OIL #3 +9%


Reglin stock Nitrile 65 Rubber Sheet in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements. To see our range of stocked strips please see Nitrile Rubber Strips.

NITR008Nitrile 65 Rubber Sheet 0.8mm x 1200mm (10 L/M Rolls)1.2 kgs
NITR01.5Nitrile 65 Rubber Sheet 1.5mm x 1200mm (10 L/M Rolls)2.2 kgs
NITR02Nitrile 65 Rubber Sheet 2mm x 1200mm (10 L/M Rolls)2.9 kgs
NITR02.4Nitrile 65 Rubber Sheet 2.4mm x 1200mm (10 L/M Rolls)3.5 kgs
NITR03Nitrile 65 Rubber Sheet 3mm x 1200mm (10 L/M Rolls)4.3 kgs
NITR031500Nitrile 65 Rubber Sheet 3mm x 1500mm (10 L/M Rolls)5.4 kgs
NITR04.5Nitrile 65 Rubber Sheet 4.5mm x 1200mm (10 L/M Rolls)6.4 kgs
NITR06Nitrile 65 Rubber Sheet 6mm x 1200mm (10 L/M Rolls)8.6 kgs
NITR08Nitrile 65 Rubber Sheet 8mm x 1200mm (10 L/M Rolls)11.5 kgs
NITR09Nitrile 65 Rubber Sheet 9mm x 1200mm (10 L/M Rolls)12.9 kgs
NITR12Nitrile 65 Rubber Sheet 12mm x 1200mm (10 L/M Rolls)17.2 kgs
NITR19Nitrile 65 Rubber Sheet 19mm x 1200mm (5 L/M Rolls)27.2 kgs
NITR25Nitrile 65 Rubber Sheet 25mm x 1200mm (5 L/M Rolls)35.8 kgs