Nitrile 65 Insertion Rubber Sheet

Reglin Nitrile 65 Insertion is a premium grade 65 Duro reinforced oil and fuel resistant rubber sheet.


Reglin Nitrile 65 Insertion is made from a premium Nitrile rubber compound and will display excellent resistance to oil and petroleum-based products including a range of fuels, greases, solvents and hydraulic fluids.

Nitrile 65 Insertion is reinforced with a nylon monofilament fabric which gives improved tear strength and dimensional stability.

Nitrile 65 Insertion has low gas permeability and will display good water resistance.  It is also resistant to mineral oils and a range of aliphatic hydrocarbons.

Nitrile 65 Insertion has excellent physical properties including mechanical strength and abrasion resistance. It will also display good temperature resistance and moderate chemical resistance to some acids and alkalis.


Reglin Nitrile 65 Insertion has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating, and protecting steel or other surfaces in applications which require a tear resistant rubber.

Nitrile is suitable for use in applications with long term exposure to oils and petroleum-based products such as grease, hydraulic fluid and a range of fuels and solvents.

Its properties make it suitable for use in a range of applications including:

  • Flange gaskets on pipes and tanks
  • Lining of equipment
  • Transfer and joining sleeves
  • Bitumen handling equipment seals and skirts
  • Insulating strip
  • Isolation barriers
  • Oil resistant Skirting rubber
  • Fuel hose camlock washers
  • Variety of oil resistant sealing applications


Polymer Content100%
ReinforcementNylon Monofilament
Specific Gravity1.20ASTM D297
Hardness65° ± 5° Shore AASTM D2240
Tensile Strength15 MPa (min)ASTM D412
Elongation @ Break400% (min)ASTM D412
Abrasion275mm³ (max) @ 10NASTM D5963
Temperature Range-25°C to +90°C
Compression Set30%ASTM D395 B
Tear Strength40 N/mm (min)ASTM D624
Oil ResistanceVolume Swell 72 hrs @ 70°C
OIL #1 -3%
OIL #2 +5%
OIL #3 +9%


Reglin stock Nitrile 65  Insertion Rubber Sheet in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

NITRI01.5NNitrile 65 Insertion Rubber Sheet 1.5mm x 1200mm x 1ply Nylon Reinforced (10 L/M Rolls)2.2 kgs
NITRI02NNitrile 65 Insertion Rubber Sheet 2mm x 1200mm x 1ply Nylon Reinforced (10 L/M Rolls)3 kgs
NITRI03NNitrile 65 Insertion Rubber Sheet 3mm x 1200mm x 1ply Nylon Reinforced (10 L/M Rolls)4.4 kgs
NITRI06NNitrile 65 Insertion Rubber Sheet 6mm x 1200mm x 1ply Nylon Reinforced (10 L/M Rolls)8.8 kgs