Reglin Viton A Insertion is a premium grade 75 Duro oil, fuel, chemical and heat resistant rubber sheet with nomex reinforcement.
Reglin Viton A Insertion Rubber Sheet is made from a premium fluoroelastomer compound and will display very high temperature and excellent resistance to a broad range of chemicals and aggressive acids.
Viton A Insertion rubber is reinforced with a nomex fabric which gives improved tear strength and dimensional stability.
Viton A exhibits excellent resistance to oil and petroleum-based products including a diverse range of fuels, greases, solvents and hydraulic fluids. It is also resistant to mineral acids, aliphatic and aromatic hydrocarbons.
Viton has excellent ozone/UV resistance making it weather resistant and suitable for prolonged outdoor use. It has good physical properties including mechanical strength and will maintain its fluid resistance and flexibility across a wide temperature range.
Reglin Viton A Insertion Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.
It is typically used for sealing, insulating, isolating and protecting steel or other surfaces in applications which require a tear resistant rubber.
Viton A Insertion is suitable for long term use in corrosive environments with exposure to high temperatures.
It is also suitable for a range of applications with exposure to oils and petroleum-based products such as grease, hydraulic fluid and a range of aggressive fuels and solvents.
Its properties make it suitable for use in a range of applications including:
- Flange gaskets on pipes and tanks
- Expansion joints
- Transfer and joining sleeves
- Chemical proof flashing
- Insulting strip
- Isolation barriers
- Variety of chemical sealing applications
|Fluorine Content||66% (min)|
|Specific Gravity||1.85||ASTM D297|
|Hardness||75° ± 5° Shore A||ASTM D2240|
|Tensile Strength||7 MPa (min)||ASTM D412|
|Elongation @ Break||175% (min)||ASTM D412|
|Temperature Range||-10°C to +230°C|
|NOMEX META - ARAMID FABRIC|
|Weight||138 gm/m² (±5%)|
|Weave||28 x 28 per inch (25.4mm)|
|Tensile Strength -Warp||≥700 N/50mm|
|Tensile Strength - Weft||≥700 N/50mm|
|Elongation @ Break - Warp||29 (±10%)|
|Elongation @ Break Weft||30 (±10%)|
|Adhesion - Rubber to Fabric||3.7 Kgf/25mm|
Reglin stock Viton A Insertion Rubber Sheet in a range of standard thicknesses and roll sizes. It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.
|PART NUMBER||DESCRIPTION||WEIGHT (PER L/M)|
|VITONAINS01.5||Viton A Insertion Rubber Sheet Nomex Reinforced 1.5mm x 1200mm (10 L/M Rolls)||3.5 kgs|
|VITONAINS03||Viton A Insertion Rubber Sheet Nomex Reinforced 3mm x 1200mm (10 L/M Rolls)||7 kgs|