Contact Us

    REG-LAG FG Sheet Pulley Lagging


    REG-LAG FG Sheet Pulley Lagging is a white food grade wear resistant 60 Duro blended Natural and Nitrile rubber sheet designed for use as a rubber lagging on conveyor pulleys on conveyor systems. It has food, plant and animal based oil and fat resistance and is FDA compliant, per 21 CFR 177.2600, making it approved for repeated and long term contact with food.

    It has good resistance to wet and dry abrasion and will flex against the conveyor belt, shedding excess material and reducing build-up, whilst reducing wear on the conveyor belt itself.

    REG-LAG FG Sheet Pulley Lagging is hygienic, non-toxic, non-marking and non-allergenic. It has a diamond profile surface for shedding water away from the pulley. This increases the coefficient of friction between the drive pulley and conveyor belt, increasing grip and reducing slippage, improving drive and tracking of the conveyor belt.

    REG-LAG FG Sheet Pulley Lagging is supplied with a specially formulated neoprene based CN Bonding Layer to achieve ultimate adhesion when bonded to steel pulley surfaces. To achieve this maximum bond strength, the TRS range of cold vulcanising adhesives is recommended.

    The CN bonding layer and TRS adhesive system is extremely flexible and allows a good bond strength to be achieved even in adverse conditions often encountered when application is occurring on site and on operational equipment.

    Technical Information

    Polymer NR/NBR
    Colour White with CN bonding layer
    Specific Gravity 1.15 ASTM D297
    Hardness 60° ± 5° Shore A ASTM D2240
    Abrassion 250 mm3 (max) @ 10N ASTM D5963
    Tensile Strength 10 MPa (min) ASTM D412
    Elongation @ Break 500% (min) ASTM D412
    Tear Strength 40 N/mm (min) ASTM D624
    Resilience 30% (min) ASTM D2632
    Volume Swelling +120% (max) In Fuel B/ASTM Oil 3
    Temperature Range -20°C to +70°C

    Available Sizes

    STANDARD ROLL SIZE 1200mm x 10mtrs (6mm)
    1500mm x 10mtrs (8mm)

    Sheet pulley lagging can be supplied in cut lengths to meet your requirements.

    REG-LAG FG Sheet Pulley Lagging


    REG-LAG FG Sheet Pulley Lagging has been designed primarily for use as a lagging of conveyor belt pulleys to increase grip and reduce wear and corrosion of the pulley shell.

    REG-LAG FG Sheet Pulley Lagging can be applied to conveyor drive, tail or bend pulleys and is designed for use in medium belt tension applications.

    It is mainly used for conveyor system applications in the food storage, handling and processing industries but can be used on conveyor pulleys in any application which requires an oil resistant, hygienic, non-toxic, non-marking pulley lagging.

    REG-LAG Sheet Lagging is supplied as a roll 1200mm and 1500mm wide, ready for easy application to the pulley in a single sheet.