Contact Us

    REG-LAG 60 Sheet Pulley Lagging


    REG-LAG 60 Sheet Pulley Lagging is a black, highly elastic, premium grade, wear resistant 60 Duro blended natural and synthetic rubber sheet, designed for use as a rubber lagging on conveyor pulleys on conveyor systems. It has excellent resistance to wet and dry abrasion and will flex against the conveyor belt, shedding excess material and reducing build-up whilst reducing wear on the conveyor belt itself.

    REG-LAG 60 Sheet Pulley Lagging has a diamond profile surface for shedding dirt and water away from the pulley. This increases the coefficient of friction between the drive pulley and conveyor belt, increasing grip and reducing slippage, improving drive and tracking of the conveyor belt.

    REG-LAG 60 Sheet Pulley Lagging is supplied with a specially formulated Neoprene based CN Bonding Layer to achieve ultimate adhesion when bonded to steel pulley surfaces. To achieve this maximum bond strength, the TRS range of cold vulcanising adhesives is recommended..

    The CN bonding layer and TRS adhesive system is extremely flexible and allows for a good bond strength to be achieved even in adverse conditions often encountered, when application is occurring on site and on operational equipment.

    Technical Information

    Polymer NR/BR
    Colour Black with CN bonding layer
    Specific Gravity 1.10 ASTM D297
    Hardness 60° ± 5° Shore A ASTM D2240
    Abrassion 90 mm3 (max) @ 10N ASTM D5963
    Tensile Strength 20 MPa (min) ASTM D412
    Elongation @ Break 450% (min) ASTM D412
    Tear Strength 80 N/mm (min) ASTM D624
    Temperature Range -20°C to +70°C

    Available Sizes

    STANDARD THICKNESS (T) Mini Diamond: 8mm
    Standard Diamond: 8mm, 10mm, 12mm
    Large Diamond: 12mm, 15mm
    STANDARD ROLL SIZE 1500mm x 10mtrs (8mm, 10mm, 12mm)
    2000mm x 10mtrs (15mm)

    Sheet pulley lagging can be supplied in cut lengths to meet your requirements.

    REG-LAG 60 Sheet Pulley Lagging


    REG-LAG 60 Sheet Pulley Lagging has been designed primarily for use as a lagging of conveyor belt pulleys to increase grip and reduce wear and corrosion of the pulley shell.

    REG-LAG 60 Sheet Pulley Lagging can be applied to conveyor drive, tail, bend or take-up pulleys and is designed for use in medium belt tension applications.

    It is mainly used for conveyor system applications in the mining, quarrying and mineral and metals processing industries but can be used on conveyor pulleys in any application where required.

    REG-LAG 60 Sheet Lagging is supplied as a roll 1500mm and 2000mm wide, ready for easy application to the pulley in a single sheet.