Cera-Wear Extreme Ceramic Wear Bars

Cera-Wear Extreme Ceramic Wear Bars are a premium grade wear and impact resistant composite ceramic bar with embedded aluminium T-Track

FEATURES

Cera-Wear Extreme Ceramic Wear Bars are made from wear resistant 92% alumina ceramic tiles embedded within a rubber matrix. They display excellent resistance to both high velocity and high flow sliding abrasion and impact.

These ceramic wear bars feature interlocking hexagonal shaped ceramic tiles completely vulcanised within a 40 Duro premium synthetic rubber compound. This hexagonal shape combined with the rubber between the tiles gives maximum impact resistance.

They are supplied with aluminum T-Tracks for added stability, are lightweight and allow for strong and easy mechanical fastening to equipment.

Cera-Wear Extreme Wear Bars can be supplied as a custom engineered wear protection ceramic lining system for your equipment. They are suitable for high wear and moderate impact applications.

Cera Wear Extreme Ceramic Wear Bars

APPLICATIONS

Cera-Wear Extreme Ceramic Wear Bars have been designed primarily for use as a wear protection ceramic lining system.

They are installed into equipment to protect steel surfaces from abrasion and impact. Ceramic wear bars are predominantly used in the mining, quarrying and mineral processing industries, typically on the following equipment:

  • Chutes
  • Feed Spouts
  • Boil Boxes
  • Hoppers
  • Surge Bins
  • Conveyor Transfer Chutes
  • Deflector Plates

Cera-Wear Extreme Ceramic Wear Bars can also be used for any application which requires a mechanically fastened wear and impact resistant ceramic bar including:

  • Lifter Bars in Mills and Scrubbers
  • Clamp Bars in Trommels and Trunnions
  • Centre Clamp Bars in Screens

TECHNICAL INFORMATION

CERAMIC TILE
Alumina Content92% (min)
Density3.65 g/ccASTM C373-88
Hardness (Rockwell)77 R45NASTM C1327
Compressive Strength1950 Mpa (min)ASTM C1424-04
Flexural Strength320 Mpa (min)ASTM C1161-02c
Water Absorption0%ASTM C373-88
Abrasion by Impingement0.05 grams (max)
Abrasion by Rubbing0.1 grams (max)
RUBBER
PolymerSBR
ColourBlack
Hardness40° ± 5° Shore AASTM D2240

AVAILABLE SIZES

We stock Cera-Wear Extreme Ceramic Wear Bars in a range of standard sizes. They are supplied with embedded aluminum T-tracks designed to be fastened with T-Bolt assemblies. They can be supplied custom cut to length as required.

PART NUMBERDESCRIPTIONWEIGHT
(EACH)
TECHNICAL
DRAWING
CWB060100Cera-Wear Ceramic Wear Bar 60mm x 100mm x 1500mm with AL-90 T-Track
(Hex Pattern 25mmx 32mm A/F)
18.4 kgs
CWB100100Cera-Wear Ceramic Wear Bar 100mm x 100mm x 1500mm with AL-90 T-Track
(Hex Pattern 50mmx 32mm A/F)
31.6 kgs
keyboard_arrow_up