Reglin FRAS Insertion is a premium grade 65 Duro certified Fire-resistant and Anti-static rubber sheet with Nylon reinforcement.
FEATURES
Reglin FRAS Insertion Rubber Sheet is made from a premium SBR rubber compound specifically designed to be F.R.A.S. (Fire-resistant and Anti-static) rated.
FRAS Insertion rubber is reinforced with a heavy PN160 fabric which gives excellent tear strength and rigidity.
It is independently tested and certified by the Mine Safety Technology Centre to meet MDG 3006 / MDG 3608 Non-metallic Materials for use in Underground Coal Mines.
FRAS Insertion has good physical properties including mechanical strength and abrasion resistance.
STANDARDS
Reglin FRAS Rubber Sheet conforms with MDG 3608.
APPLICATIONS
Reglin FRAS Insertion Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.
It is typically used for sealing, insulating, isolating and protecting steel or other surfaces in applications which require a tear resistant rigid rubber.
FRAS Insertion has been specifically designed for use in underground mining, grain handling and other applications where ignition points and fire potential are a high risk.
Its properties make it suitable for use in a range of applications including:
- Conveyor curtains
- Impact curtains
- Ballistic rubber curtains
- Flange gaskets and seals
- ventilation ductwork seals
- vent bands
- Ventilation fan housing seals
- Underground mining vehice mud flaps
- Underground mining vehicle curtains and sheilds
- Coffin seal curtains
- Insulating strip
- Isolation barriers
TECHNICAL INFORMATION
| Polymer | SBR | |
| Reinforcement | 3 x PN160 Fabric | |
| Colour | Black | |
| Specific Gravity | 1.28 | ASTM D297 |
| Hardness | 65° ± 5° Shore A | ASTM D2240 |
| Tensile Strength | 14 MPa (min) | ASTM D412 |
| Elongation @ Break | 300% (min) | ASTM D412 |
| Abrasion | 180 mm³ (max) @ 10N | ASTM D5963 |
| Temperature Range | -25°C to +90°C | |
| Ignitability & Flame Propagation | Has a mean persistence time of the flame of ≤30s Has a mean persistence time of the afterglow of ≤120s Has a mean persistence time of the flame for each individual test piece of ≤45s The afterglow persistence time of each test piece is ≤180s | |
| Oxygen Index | The calculated oxygen index is not less than 28% | |
| Electrical Resistance | The mean value for Electrical Resistance on both upper and lower surfaces is not greater than 300 MΩ (300x106 ohms) | |
AVAILABLE SIZES
Reglin stock FRAS 60 Insertion Rubber Sheet in a standard thicknesses and roll size. It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.
| PART NUMBER | DESCRIPTION | WEIGHT (PER L/M) |
| FS150010R | FRAS Insertion Rubber Sheet 10mm x 1500mm x 3 PLY PN150 (30 L/M Rolls) | 19.5 kgs |