Reglin Silicone Insertion Rubber is a premium grade, non-toxic and inert 60 Duro Silicone Rubber sheet, reinforced with a tear resistant glass fibre, which has very high temperature resistance. It is completely UV stable making it highly resistant to ozone effects and will maintain its flexibility over a wide temperature range.
The specially designed glass fibre reinforcement gives the Silicone Insertion sheet improved tear strength and dimensional stability whilst not reducing temperature resistance. This sheet is suitable for sensitive and critical high temperature sealing and protection applications.
Silicone Insertion Rubber has low thermal and electrical conductivity and high dielectric strength making it suitable for critical electrical and electronic insulating and isolating applications.
|Reinforcement||Glass (Wrap & Weft) 680 dtex|
|Specific Gravity||1.20||ASTM D297|
|Hardness||60° ± 5° Shore A||ASTM D2240|
|Tensile Strength||5.5 MPa (min)||ASTM D412|
|Elongation @ Break||250% (min)||ASTM D412|
|Thermal Conductivity||0.24 W.m-1 .K-1|
|Temperature Range||-60°C to +200°C (continuous)-60°C to +250°C (intermittent)|
|STANDARD THICKNESS||1.5mm, 3mm|
|STANDARD ROLL SIZE||1200mm x 10mtrs|
Sheet rubber can be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to meet your requirements.
Reglin Silicone Insertion Rubber has been designed primarily for use as a flexible strip, pad, lining or gasket and is mainly used for sealing, insulating, isolating and protecting steel or other surfaces in sensitive and critical high temperature applications. Its properties make it suitable for use in a wide range of applications including:
- Flange gaskets on pipes and tanks
- Electrical and lighting fixture seals
- Transfer and joining sleeves
- Weatherproof flashing
- Thermal and electrical insulation
- Insulating strip
- Isolation barriers
- Dryer fan housing seals
- High temperature loading socks
- Variety of sealing applications