Reglin Silicone 60 Rubber Sheet is a premium grade 60 Duro food grade and heat resistant silicone rubber sheet.
FEATURES
Silicone 60 Rubber Sheet has excellent sealing capabilities. It has very high temperature resistance and will maintain its flexibility and physical properties over a wide temperature range. Silicone has excellent ozone resistance and is UV stable making it weather resistant and suitable for outdoor use.
Reglin Silicone 60 Rubber Sheet is tested and conforms to FDA 21 CFR 177.2600 “Rubber articles intended for repeated use”. This makes it suitable for contact with dry, aqueous and fatty foods as defined by the FDA.
Silicone 60 Rubber Sheet is fully post cured. It is carefully produced to comply with European Commission regulations EC 2023/2006 “good manufacturing practise for materials and articles intended to come into contact with food”.
Silicone 60 Rubber Sheet has low thermal and electrical conductivity and high dielectric strength. This makes it suitable for critical electrical and electronic insulating and isolating applications.



STANDARDS
Reglin Silicone 60 Rubber Sheet conforms with the following standards.
As stated in FDA 21 CFR 177.2600. In accordance with good manufacturing practise finished rubber articles intended for repeated use in contact with food shall be thoroughly cleansed prior to their first use in contact with food.
TECHNICAL INFORMATION
Polymer | Silicone | |
Colour | Red, White, Translucent, Blue, Black | |
Specific Gravity | 1.20 | ASTM D297 |
Hardness | 60° ± 5° Shore A | ASTM D2240 |
Tensile Strength | 7 MPa (min) | ASTM D412 |
Elongation @ Break | 250% (min) | ASTM D412 |
Tear Strength | 12.5 N/mm (min) | ASTM D624 |
Compression Set (24hrs @ 150°C) | 30% (max) | ASTM D395B |
Thermal Conductivity | 0.24 W.m-1 .K-1 | |
Temperature Range | -60°C to +200°C (continuous) Silicone can also withstand higher intermittent temperatures. For more information see Life Expectancy of Silicone Rubber |
Brittle Point | -800°C (-112°F) | ASTM D746 |
Limiting Oxygen Index | 24.0% | BS 2782 Part 1 |
Dielectric Strength | 23 kV.MM-1 | VDE 0303 |
Dielectric Constant | 2.9 | VDE 0303 |
Dissipation Factor | 3x10-4 | VDE 0303 |
Volume Resistivity | 3x1015Ω.com | VDE 0303 |
Radiation Resistance | >105 Grays (107Rads) typical | |
Coeffcient of Thermal Expansion | Between 300 and 250x10-6cm/cm/°C (Typical range) |
Available Sizes
STANDARD THICKNESS | Red: 0.3mm, 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 10mm, 12mm White: 1mm, 1.5mm, 2mm, 3mm, 5mm, 6mm, 10mm Translucent: 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 5mm, 6mm, 8mm, 10mm Blue: 3mm. 6mm Black: 1mm, 1.5mm, 3mm |
STANDARD ROLL SIZE | 1200mm x 10mtrs (0.3mm - 6mm) 1200mm x 5mtrs (10mm, 12mm) |
Silicone 60 can be supplied in cut lengths, strips, pads and custom cut shapes. |

Applications
Reglin Silicone 60 Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.
It is typically used for sealing, insulating, isolating and protecting steel or other surfaces. It is suitable for use in hygienic environments such as food, drink and pharmaceutical facilities as well as sensitive electrical and critical high temperature applications.
Its properties make it suitable for use in a wide range of applications including:
- Flange gaskets on pipes and tanks
- Electrical and lighting fixture seals
- Lining of pipes and vessels
- Transfer and joining sleeves
- Weatherproof flashing
- Thermal and electrical insulation
- Insulating strip
- Isolation barriers
- Vacuum forming blankets
- Heat resistant and non-stick skirting rubber
- Dryer Fan housing seals
- High temperature loading socks
- Heat resistant expansion joints
- Variety of sealing applications