Contact Us

    Regline 40 Lining Rubber


    Regline 40 Lining Rubber is an orange, premium grade, soft, flexible and highly elastic, 40 Duro wear resistant Natural rubber sheet which has excellent resistance to wet and dry fine particle sliding abrasion. Regline 40 contains reinforcing fillers giving it extra resistance to cutting and gouging by sharp particles. Regline 40 will display resistance to some mild chemicals, including acids and alkalis used in mineral processing.

    Regline 40 is supplied with a specially formulated Neoprene based CN Bonding Layer to achieve ultimate adhesion when bonded to steel or other rubber surfaces. To achieve this ultimate bond strength, the TRS range of cold, vulcanising adhesives are recommended.

    Regline 40 has excellent physical properties including cut and tear resistance making it suitable for wear protection rubber lining applications.

    The CN bonding layer and TRS adhesive system is extremely flexible and allows good bond strength to be achieved even in adverse conditions often encountered when application is occurring on site and on operational equipment.

    Technical Information

    Polymer NR
    Colour Orange with CN bonding layer
    Specific Gravity 1.08 ASTM D297
    Hardness 40° ± 5° Shore A ASTM D2240
    Abrassion 85mm³ (max) @ 5N ASTM D5963
    Tensile Strength 20 MPa (min) ASTM D412
    Elongation @ Break 600% (min) ASTM D412
    Tear Strength 45 N/mm (min) ASTM D624
    Temperature Range -20°C to + 70°C

    Available Sizes

    STANDARD THICKNESS 3mm, 6mm, 10mm, 12mm, 20mm*
    STANDARD ROLL SIZE 1500mm x 10mtrs
    2000mm x 10mtrs (6mm, 10mm, 12mm only)

    Lining rubber can be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to meet your requirements.
    *Min order quantities and lead times apply to this product

    Regline 40 Lining Rubber - Premium


    Regline 40 Lining Rubber has been designed primarily for use as a rubber lining for the wear and corrosion protection of steel surfaces of equipment. It’s mainly used in abrasion applications in the mining and mineral processing industries but can be used for any general abrasion applications. Typical equipment to be lined includes:

    • Tanks
    • Chutes
    • Floatation Cells
    • Screen cross beams and side plates
    • Screen underpads
    • Trommels
    • Trunnions
    • Magnetic Seperator Conveyor Belt Covers
    • Conveyor Belt Pulleys And Idlers

    It can also be used for other applications which require a flexible abrasion resistant rubber including:

    • Loading socks
    • Transfer and joining sleeves
    • Variety of sealing applications