Mill Backing Lining Rubber – Superior
60 duro, Wear Resistant, Natural Rubber, Buffed Back
Reglin Mill Backing Lining Rubber is a black, superior grade, 60 Duro blended natural and synthetic rubber sheet which has moderate resistance to impact and abrasion.
Mill Backing Lining Rubber is supplied with a buffed back finish to assist in adhesion when bonded to steel mill shell surfaces. To achieve good bond strength, the TRS range of cold, vulcanising adhesives are recommended.
Mill Backing has good physical properties including cut and tear resistance and has been designed specifically for use as a protection and sealing rubber lining behind Mill Liner plates.
Technical Information Extra
|Specific Gravity||1.25||ASTM D297|
|Hardness||65° ± 5° Shore A||ASTM D2240|
|Abrassion||180mm³ (max) @ 10N||ASTM D5963|
|Tensile Strength||10 MPa (min)||ASTM D412|
|Elongation @ Break||350% (min)||ASTM D412|
|Tear Strength||40 N/mm (min)||ASTM D624|
|Temperature Range||-20°C to + 70°C|
|STANDARD ROLL SIZE||1200mm x 10mtrs|
Lining rubber can be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to meet your requirements.
Reglin Mill Backing Lining Rubber has been designed primarily for use a rubber back lining for the wear and corrosion protection of steel surfaces of equipment. It is mainly used behind liner plates on mill shells to ensure a seal is created between the steel parts.
It can also be used for other applications that require a back rubber lining.
- Mining & Quarrying
- Mineral Processing