Reglin Metal detectable Silicone Rubber Sheet is a premium grade 60 Duro food grade and heat resistant silicone rubber sheet.
FEATURES
Metal detectable silicone rubber contains additives which make it magnetic and visible to metal detection equipment.
It has very high temperature resistance and will maintain its flexibility and physical properties over a wide temperature range. Silicone has excellent ozone resistance and is UV stable making it weather resistant and suitable for outdoor use.
Reglin Metal detectable Silicone Rubber Sheet is tested and conforms to FDA 21 CFR 177.2600 “Rubber articles intended for repeated use”. This makes it suitable for contact with dry, aqueous and fatty foods as defined by the FDA.
Metal Detectable Silicone Rubber Sheet is fully post cured. It is carefully produced to comply with European Commission regulations EC2023/2006 “good manufacturing practise for materials and articles intended to come into contact with food”.



As stated in FDA 21 CFR 177.2600. In accordance with good manufacturing practise finished rubber articles intended for repeated use in contact with food shall be thoroughly cleansed prior to their first use in contact with food.
TECHNICAL INFORMATION
Polymer | Silicone | |
Colour | Blue | |
Hardness | 68° ± 5° Shore A | ASTM D2240 |
Tensile Strength | 8 MPa (min) | ASTM D412 |
Elongation @ Break | 327% (min) | ASTM D412 |
Tear Strength | 19 N/mm (min) | ASTM D624 |
Compression Set (24hrs @ 150°C) | 11% (Max) | ASTM D395B |
Metal Detectable Properties | 11.25/9.34mm (median test value) | |
Thermal Conductivity | 0.24 W.m-1 .K-1 | |
Temperature Range | -60°C to +200°C (continuous) Silicone can also withstand higher intermittent temperatures. For more information see Life Expectancy of Silicone Rubber Please note: Exposure of Metal detectable Silicone to continuous high temperatures can cause loss of magnetic properties. |
Brittle Point | -800°C (-112°F) | ASTM D746 |
Limiting Oxygen Index | 24.0% | BS 2782 Part 1 |
Radiation Resistance | >105 Grays (107Rads) typical | |
Dielectric Strength | 23 kV.MM-1 | VDE 0303 |
Dielectric Constant | 2.9 | VDE 0303 |
Dissipation Factor | 3x10-4 | VDE 0303 |
Volume Resistivity | 3x1015Ω.com |
Available Sizes
STANDARD THICKNESS | 3mm |
Other available thicknesses include; 1.5mm, 2mm, 4mm 5mm and 6mm. Minimum order quantities and lead times apply. | |
STANDARD ROLL SIZE | 1200mm x 10mtrs |
Metal Detectable Silicone can be supplied in cut lengths, strips, pads and custom cut shapes. |

Applications
Reglin Metal detectable Silicone Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.
It is typically used for sealing, insulating, isolating and protecting steel or other surfaces.
It is suitable for use in critical hygienic environments such as food, drink and pharmaceutical facilities which use metal detection equipment to eliminate possible contamination.
Its properties make it suitable for use in a wide range of applications including:
- Flange gaskets on pipes and tanks
- Transfer and joining sleeves
- Insulating strip
- Isolation barriers
- Variety of sealing applications