EPDM 65 Nylon Insertion Rubber Sheet

Reglin EPDM 65 Insertion is a premium grade 65 Duro weather and heat resistant rubber sheet with nylon reinforcement. 

FEATURES

Reglin EPDM 65 Insertion Rubber Sheet is made from a premium EPDM rubber compound and will display high temperature and excellent chemical resistance to both acids and alkalis.

EPDM 65 Insertion rubber is reinforced with a nylon monofilament fabric which gives improved tear strength and dimensional stability.

EPDM has excellent ozone/UV resistance making it weather resistant and suitable for prolonged outdoor use.  It has good physical properties including mechanical strength.

EPDM exhibits outstanding water resistance.   It is suitable for prolonged exposure to aquatic environments and will not deteriorate when submerged in fresh or sea water.  It is compatible with hot water and steam.

APPLICATIONS

Reglin EPDM Insertion Rubber Sheet has been designed primarily for use as a flexible strip, pad, gasket or lining.

It is typically used for sealing, insulating, isolating and protecting steel or other surfaces in applications which require a tear resistant rubber.

EPDM is suitable for long term use in outdoor and marine environments with high UV exposure.  It is also suitable for a range of applications with exposure to high temperatures and mild chemicals.

Its properties make it suitable for use in a range of applications including:

  • Flange gaskets on pipes and tanks
  • Lining of pipes and tanks
  • Transfer and joining sleeves
  • Weatherproof flashing
  • Insulating strip
  • Isolation barriers
  • Heat resistant skirting rubber
  • Heat resistant belt scrapers
  • Dust covers exposed to extreme weathering and operating temperatures
  • Variety of underwater applications

TECHNICAL INFORMATION

PolymerEPDM
Polymer Content100%
ReinforcementNylon Monofilament
ColourBlack
Specific Gravity1.15ASTM D297
Hardness65° ± 5° Shore AASTM D2240
Tensile Strength10 MPa (min)ASTM D412
Elongation @ Break350% (min)ASTM D412
Abrasion275 mm³ (max) @ 10NASTM D5963
Temperature Range-25°C to +120°C
Tear Strength35 N/mm (min)ASTM D624

AVAILABLE SIZES

Reglin stock EPDM 65 Insertion Rubber Sheet in a range of standard thicknesses and roll sizes.   It can also be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to suit your application requirements.

PART NUMBERDESCRIPTIONWEIGHT (PER L/M)
EPDMI01.5NEPDM 65 Insertion Rubber Sheet 1.5mm x 1200mm x 1 Ply Nylon Reinforced(10 L/M Rolls)2.3 kgs
EPDMI03NEPDM 65 Insertion Rubber Sheet 3mm x 1200mm x 1 Ply Nylon Reinforced (10 L/M Rolls)4.5 kgs
EPDMI04.5NEPDM 65 Insertion Rubber Sheet 4.5mm x 1200mm x 2 Ply Nylon Reinforced (10 L/M Rolls)6.8 kgs
EPDMI06NEPDM 65 Insertion Rubber Sheet 6mm x 1200mm x 2 Ply Nylon Reinforced (10 L/M Rolls)9 kgs
keyboard_arrow_up