CERA-GRIP ST Ceramic Strip Pulley Lagging is a black, highly elastic premium grade wear resistant 60 Duro blended Natural and synthetic rubber strip designed for use as a rubber lagging on conveyor pulleys on conveyor systems.
CERA-GRIP ST contains wear resistant 92% alumina ceramic tiles vulcanised within the rubber on all 5 sides for the ultimate abrasion resistance, whilst maintaining the flex of the tiles against the conveyor belt, shedding excess material and reducing build-up but also reducing wear on the conveyor belt itself.
CERA-GRIP ST Ceramic tiles have a smooth surface which sits flat against the conveyor cover to improve wear life but still allow for movement. The grooves are for shedding dirt and water away from the pulley. This also increases the coefficient of friction between the drive pulley and conveyor belt, increasing grip and reducing slippage, improving drive and tracking of the conveyor belt.
CERA-GRIP ST Ceramic Strip Pulley Lagging is supplied with a specially formulated Neoprene based CN Bonding Layer to achieve the ultimate adhesion when bonded to steel pulley surfaces. To achieve this maximum bond strength, the TRS range of cold vulcanising adhesives is recommended.
The CN bonding layer and TRS adhesive system is extremely flexible and allows a good bond strength to be achieved even in adverse conditions often encountered when application is occurring on site and on operational equipment.
|Aluminium Oxide Al203||92% (min)|
|Density||3.65 g/cc||ASTM C373-88|
|Hardness (Rockwell)||77 R45N||ASTM C1327|
|Compressive Strength||1950 Mpa (min)||ASTM C1424-04|
|Flexural Strength||320 Mpa (min)||ASTM C1161-02c|
|Water absorption||0%||ASTM C373-88|
|Abrasion by Impingement||0.05 grams (max)|
|Abrasion by Rubbing||0.1 grams (max)|
|AVAILABLE STRIP SIZES||See PDF|
|CERAMIC PROFILE||See PDF|
Min order quantities and lead times apply to this product
CERA-GRIP ST Ceramic Strip Pulley Lagging has been designed primarily for use as a rubber lagging of conveyor belt pulleys to increase grip and reduce wear and corrosion of the pulley shell.
CERA-GRIP ST Ceramic Strip Pulley Lagging, is designed to be applied to conveyor tail, bend and take-up pulleys operating in extreme conditions. It is suitable for use in wet and dirty conditions and high belt tension applications.
It is mainly used for conveyor system applications in the mining, quarrying and mineral and metals processing industries but can be used on conveyor pulleys in any application where required.
CERA-GRIP ST Ceramic Strip Pulley Lagging is supplied as a strip 385mm wide, ready for easy application without removing the pulley if required.
- Mining & Quarrying
- Mineral Processing