PE (Polyethylene) Sponge Rubber Sheet – Superior
Impact Resistant, UV Resistant, Closed Cell, Polyethylene Foam
Reglin PE Sponge Rubber is a black, superior grade, closed cell Sponge Rubber Sheet. It has good mechanical strength and excellent shock absorption and vibration dampening.
PE Sponge Rubber Sheet is extremely tough yet economical and is suitable for applications which require sealing under heavy load and impact. It is UV stable, resistant to ozone effects and weathering and is suitable for limited cycles of compression.
PE Sponge can be supplied in a range of densities to suit the amount of load being applied and amount of compression required.
|Density||28 ±5 kg/m3|
|Hardness||15-22° ± 5° Shore 00|
|Tensile Strength||1.7 kg/cm2|
|Tear Strength||1.0 kg/cm|
|Compression Strength (25%)||0.2 kg/cm2|
|Compression Set||8% (max)|
|Compression Deflection||5 kPa|
|Thermal Conductivity||0.030 W/m/°C|
|Water Absorption||0.01 g/cm3|
|Temperature Range||-30° to +80°C (max)|
|Flammability CNS1048A2165 (mm/second)||60/120 30mm p/min||UL94 HF-2 (UL94-1997)|
|Total Volatile Organic Compound Specific Area Emission Rate||0.06 mg/m2/hr|
|STANDARD THICKNESS||Any thickness 3mm - 100mm|
|STANDARD ROLL SIZE||1220mm x 2440mm (3mm-80mm) 1000mm x 2000mm (81mm-100mm)|
PE Sponge can also be supplied in harder densities upon request
SCut lengths, strips and custom shapes are available upon request Sheets can be supplied with adhesive backing upon request
PE Sponge Rubber has been designed primarily for use as a compressible strip, pad or gasket. It is mainly used for sealing between surfaces in the construction industry but can be used anywhere a compressible seal is required under heavy load and impact.
Its properties make it suitable for use in a wide range of applications including:
- Construction gaskets and seals
- Insulation barriers
- Expansion joints
- Filler blocks
- Sealing strips for concrete pouring
- Variety of sealing applications
- Stablising/cushioning machinery
- Mining & Quarrying
- Mineral Processing
- Oil & Gas