FEATURES
Reglin Nitrile Insertion Rubber is a black premium grade, 65 Duro Nitrile Rubber sheet, reinforced with a tear resistant Nylon monofilament fabric. It has petroleum based fuel and oil resistance, including petrol, diesel and LPG. It is also resistant to mineral oils and greases and gas permeability.
The specially designed Nylon monofilament fabric reinforcement will not allow fluid penetration and gives Nitrile Insertion improved tear strength and dimensional stability, making Nitrile Insertion suitable for gasket sealing applications.
Technical Information
Polymer | NBR | |
Reinforcement | Nylon Monofilament | |
Colour | Black | |
Specific Gravity | 1.20 | ASTM D297 |
Hardness | 65° ± 5° Shore A | ASTM D2240 |
Abrasion | 275mm3 (max) @ 10N | ASTM D5963 |
Tensile Strength | 15 MPa (min) | ASTM D412 |
Elongation @ Break | 400% (min) | ASTM D412 |
Compression Set | 30% | ASTM D395 B |
Tear Strength | 40 N/mm (min) | ASTM D624 |
Temperature Range | -25°C to +90°C | |
Volume Swell @ 70°C x 72 Hrs | OIL #1 -3% OIL #2 +5% OIL #3 +9% | ASTM D471 |
Available Sizes
STANDARD THICKNESS | 1 Ply: 1.5mm, 3mm 2 Ply: 4.5mm, 6mm |
STANDARD ROLL SIZE | 1200mm x 10mtrs |
Sheet rubber can be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to meet your requirements.

Applications
Reglin Nitrile Insertion Rubber Sheet has been designed primarily for use as a flexible strip, pad or gasket and is mainly used for Sealing, Insulating, Isolating and Protecting steel or other surfaces. Its properties make it suitable for use in a wide range of applications including:
- Flange gaskets on pipes and tanks
- Transfer and joining sleeves
- Oil and fuel seals
- Insulating strip
- Isolation barriers