Contact Us

    Conveyor Impact Bars – Premium

    60 Duro, Impact Resistant, Wear Resistant, UHMPWE & Natural Rubber Composite, Al T-Track

    Reglin Conveyor Impact Bars are a moulded composite slider bar of wear resistant ultra high molecular weight polyethylene (UHMPWE) vulcanised to a black, highly elastic premium grade, impact resistant 60 Duro synthetic Rubber. They are designed for use as a replaceable bar on conveyor impact slider beds at loading points on conveyor systems.

    The UHMWPE top layer is abrasion resistant with low friction which results in a low coefficient of friction between the Conveyor Impact Bar and conveyor cover allowing the conveyor belt to slide against the bar under heavy loading, whilst the rubber backing absorbs the impact of loading.

    Impact Bars are supplied with tapered ends to reduce friction on the conveyor belt when entering and exiting the loading point. This also assists to eliminate a possible catch point, resulting in a smooth transition through the loading zone.

    Impact Bars are supplied with embedded AL-65 Aluminium T-Tracks for stability under impact. This T-track allows for strong and easy mechanical fastening to steel impact bed structures.

    Impact Bars can be supplied as a full element or as a custom cut bar to suit the length of the bed, ready for easy installation. They can be supplied as per specifications and drawings or custom designed to meet application requirements.

    Impact Bars are supplied with T-Bolt assemblies, which can be adjusted along the length of the T-track for flexible and easy installation.

    Technical Information

    Specific Gravity1.12ASTM D297
    Hardness60° ± 5° Shore AASTM D2240
    Tensile Strength17.5 MPa (min)ASTM D412
    Elongation @ Break450% (min)ASTM D412
    Tear Strength30 N/mm (min)ASTM D624
    Specific Gravity0.935ASTM D297
    Hardness66 Shore DASTM D2240
    Tensile Strength32 MPa (min)ASTM D412
    Elongation @ Break250% (min)ASTM D412
    Tear Strength90 kN/m2 (min)ASTM D624

    Available Sizes

    STANDARD THICKNESS (T)50mm*, 55mm, 75mm, 100mm*
    Overall thickness includes 10mm UWMWPE top layer
    STANDARD BAR SIZE100mm x 1500mm (See reverse for profile)
    STANDARD T-TRACKAL-65 (Max T-Bolt M16)
    STANDARD T-BOLT ASSEMBLYT-Bolt M12 x 40mm long, washer and nylock nut
    T-Bolt M16 x 90mm long, washer and nylock nut

    UHMWPE Top layer can be supplied thicker upon request *
    Min order quantities and lead times apply to this product
    Length can be cut to suit customer requirements
    Custom length bars up to 1800mm long can be supplied upon request
    Recommended: 5 x T-Bolt assemblies for 1500mm long impact bars

    Conveyor Impact Bars


    Conveyor Impact Bars are designed primarily for use as slider bars in conveyor impact beds on conveyor systems in the Mining, Quarrying and Mineral and Metals Processing industries but can be used on conveyor systems in any application where impact beds are required.

    The Conveyor Impact Slider Bed acts as cradle underneath the conveyor system loading points which creates stability for the conveyor belt throughout the loading process reducing material spillage and dust escaping.


    • Mining & Quarrying
    • Mineral Processing
    • Construction
    • Manufacturing
    • Agriculture