Building Sound Insulation: Neoprene 60 HG Rubber – Bearing Strips For Joist Isolation
Building Soundproofing, Noise Insulation & Sealing for Buildings, Floor Joists Isolation
Reglin Neoprene 60 HG Rubber was used as a bearing strip for noise reduction between structural timber flooring panels and steel beams, for the construction of a multi-storey building.
Location: Melbourne city
Client: Construction company
Project: Multilevel office building
FLEXIBLE RUBBER STRIP WAS UTILISED FOR STEEL STRUCTURAL SOUND INSULATION
A newly designed multi-storey office building in Melbourne’s CBD, was being constructed with a steel frame which also required installing the newly released, Cross Laminated Structural Timber Panel Flooring System. This system needed to be quickly installed on each storey of the steel frame structure prior to the next level being started.
It was also critical to ensure that the flooring system be installed onto the steel beams with maximum contact to the surface area and be secured in such a way to allow for the varying expansion between the steel and timber materials, whilst assisting to comply with the Building Code of Australia (BCA) Sound Insulation Regulations between floors.
The customer ultimately needed a flexible and compressible isolation layer between the flooring timber and steel beams, which ensured long-lasting performance. A fast solution was also critical to meet the construction timeline for the initial flooring to be installed without delay.
FLEXIBLE JOINT: NEOPRENE 60 HG RUBBER WAS USED AS AN EFFECTIVE SOLUTION
Reglin Rubber supplied Neoprene 60 HG Rubber Strips and Pads, which were laid on the steel beams underneath the flooring panels to create a flexible joint. The premium Neoprene 60 HG Rubber’s physical properties meant it was ideally suited for this task. The rubber’s high load bearing capacity was not only ideal for the timber flooring panels but also for the trafficable loads that the construction needed to deliver once the office building was in use.
The compressibility and compression set properties of Neoprene 60 HG allowed for the absorption of the variances in the rigid steel beam structure, ensuring the maximum surface contact area with the timber flooring. This effectively reduced the movement between the building materials and the potential for structure-borne noise transmission.
Reglin Neoprene 60 HG Rubber Strips performed very well and met the customer’s expectations.
The Reglin Neoprene 60 HG Rubber Strips and Pads were fit for purpose and were a successful and fast solution for the installation of the laminated timber flooring panels. This rubber solution also worked effectively to deliver a flexible floor jointing system, which met all requirements for building material movement challenges and the Australian building sound insulating regulations.
REGLIN NEOPRENE 60 HG RUBBER SHEET
Neoprene 60 HG Rubber is a black, premium grade, abrasion and impact resistant, highly elastic 60 Duro Neoprene rubber sheet. Its physical properties including bearing strength and UV resistance make it suitable for long design life bearing, sealing and isolating construction applications. It can be supplied in rolls or custom cut strips and pads to meet customer requirements for quick and easy installation.
For more information on Neoprene 60 HG Rubber Sheet, tab here.