Contact Us

    Regline 38 Lining Rubber – Premium

    38 Duro, Wear Resistant, Natural Rubber, CN Bonding Layer

    Regline 38 Lining Rubber is a pink, premium grade, soft, flexible and highly elastic 38 Duro wear resistant natural rubber sheet which has excellent resistance to wet slurry and fine particle sliding abrasion. Regline 38 will display resistance to some mild chemicals, including acids and alkalis used in mineral processing.

    Regline 38 is supplied with a specially formulated Neoprene based CN Bonding Layer to achieve ultimate adhesion when bonded to steel or other rubber surfaces. To achieve this ultimate bond strength, the TRS range of cold vulcanising adhesives is recommended.

    Regline 38 has excellent physical properties including cut and tear resistance making it suitable for wear protection rubber lining applications. The CN bonding layer and TRS adhesive system is extremely flexible. It allows for good bond strength to be achieved, even in adverse conditions often encountered on site and on operational equipment.

    The CN bonding layer and TRS adhesive system is extremely flexible. It allows for good bond strength to be achieved, even in adverse conditions often encountered on site and on operational equipment.

    Technical Information

    PolymerNR
    ColourPink with CN bonding layer
    Specific Gravity0.97ASTM D297
    Hardness38° ± 5° Shore AASTM D2240
    Abrassion80mm³ (max) @ 5NASTM D5963
    Tensile Strength19 MPa (min)ASTM D412
    Elongation @ Break650% (min)ASTM D412
    Tear Strength60 N/mm (min)ASTM D624
    Resilience72% (Min)ASTM D2632
    Temperature Range-20°C to + 70°C

    Available Sizes

    STANDARD THICKNESS3mm, 6mm, 10mm, 12mm, 16mm, 20mm, 25mm
    STANDARD ROLL SIZE1500mm x 10mtrs

    Lining rubber can be supplied in cut lengths, strips, pads and a wide variety of custom cut shapes and gaskets to meet your requirements.

    Regline 38 Lining Rubber - Premium

    Applications

    Regline 38 Lining Rubber has been designed primarily for use as a rubber lining for the wear and corrosion protection of steel surfaces of equipment. It’s mainly used for wet abrasion applications such as slurry handling in the mineral processing industry but can be used for any fine particle abrasion applications.
    Typical equipment to be lined includes:

    • Pipe and tanks
    • Valves and pumps
    • Cyclones
    • Launders
    • Flotation Cells
    • Mill feed chutes
    • Sumps and underpans
    • Trommels
    • Trunnions
    • Magnetic separator drums

    It can also be used for other applications which require a flexible abrasion resistant rubber including:

    • Loading socks
    • Transfer and joining sleeves
    • Variety of sealing applications

    Industries

    • Mining & Quarrying
    • Construction
    • Manufacturing