Cera-Wear Extreme Ceramic Wear Plates

Cera-Wear Extreme Ceramic Wear Plates are a premium grade wear and impact resistant composite ceramic liner with steel backing.

FEATURES

Cera-Wear Extreme Ceramic Wear Plates are made from wear resistant 92% alumina ceramic tiles embedded within a rubber matrix.  They display excellent resistance to both high velocity and high flow sliding abrasion and impact.

Cera-Wear Extreme Wear Plates feature interlocking hexagonal shaped ceramic tiles completely vulcanized within a 40 Duro premium synthetic rubber compound.  This hexagonal shape combined with the rubber between the tiles gives maximum impact resistance.

Cera-Wear Extreme Ceramic Wear Plates are reinforced with a vulcanized steel backing plate for stability in the most demanding applications.  This vulcanized steel backing allows for extremely strong mechanical fastening to equipment.

Cera-Wear Extreme Ceramic Wear Plates can be supplied as a custom engineered wear protection lining system for your equipment. They are suitable for extremely high wear applications.

APPLICATIONS

Cera-Wear Extreme Ceramic Wear Plates have been designed primarily for use as a wear protection ceramic lining system.

They are installed into equipment to protect steel surfaces from abrasion and impact. Ceramic Wear Liners are predominantly used in the Mining, Quarrying and Mineral processing industries, typically on the following equipment:

  • Chutes and Feed Spouts
  • Hoppers and Surge Bins
  • Skips and Flasks for Underground Mining
  • Feeders
  • Cyclones
  • Launders
  • Screens
  • Conveyor Transfer Chutes and Deflector Plates
  • Sumps and Underpans

Cera-wear extreme plates are also used extensively throughout the Agriculture industry on a range of grain handling, processing and storage equipment.

TECHNICAL INFORMATION

CERAMIC TILE
Alumina Content92% (min)
Density3.65 g/ccASTM C373-88
Hardness (Rockwell)77 R45NASTM C1327
Compressive Strength1950 Mpa (min)ASTM C1424-04
Flexural Strength320 Mpa (min)ASTM C1161-02c
Water Absorption0%ASTM C373-88
Abrasion by Impingement0.05 grams (max)
Abrasion by Rubbing0.1 grams (max)
RUBBER
PolymerSBR
ColourBlack
Hardness40° ± 5° Shore AASTM D2240

AVAILABLE SIZES

Reglin stock Cera-Wear Extreme Ceramic Wear Plates in a range of standard thicknesses and panel sizes.  They can be custom cut and supplied with welded studs as per specifications and drawings. See Custom Cut Steel Backed Ceramic Liners.

PART NUMBERDESCRIPTIONWEIGHT
(EACH)
TECHNICAL
DRAWING
CWP3505/2505HRCera-Wear Extreme Ceramic Wear Plate 35mm x 500mm x 500mm with 5mm steel backing plate (Hex pattern 25mm thick x 20mm A/F tile on 5mm rubber with rubber between)31.5 kgs PDF
CWP3505/2505HR250Cera-Wear Extreme Ceramic Wear Plate 35mm x 250mm x 500mm with 5mm steel backing plate (Hex pattern 25mm thick x 20mm A/F tile on 5mm rubber with rubber between)16 kgs PDF
CWP6505/5010HRCera-Wear Extreme Ceramic Wear Plate 65mm x 282mm x 305mm with 5mm steel backing plate (Hex pattern 50mm thick x 32mm A/F tile on 10mm rubber with rubber between)18 kgs PDF
keyboard_arrow_up